Monterey Concrete Contractor: Driveways, Patios & Concrete Services in Monterey, CA

10+ Years of Hands-On Concrete Experience

Monterey Concrete Contractor has 10+ years of concrete experience spanning residential and commercial installation, repair, decorative concrete, foundations, and specialty scopes. That experience informs how each job is scoped, prepared, placed, and finished for the Monterey Peninsula climate.

Insured Concrete Service

Monterey Concrete Contractor is insured. Insurance is part of operating a responsible concrete service, and the insured status applies across the residential and commercial work offered within the 25-mile service area. Coverage details can be discussed during the estimate conversation.

Project-Specific Preparation, Placement, and Finishing

Each concrete project is planned around subgrade preparation, aggregate base, formwork, reinforcement, control joints, and the finish that suits the surface — from broom and trowel finishes to stamped texture and sealing. Placement and jointing are matched to the slab size, drainage, and intended use.

Serving Monterey and Communities Within 25 Miles

Monterey Concrete Contractor is a service-area business serving Monterey and communities within an honest 25-mile radius, including Pacific Grove, Seaside, Marina, Carmel-by-the-Sea, Pebble Beach, and Carmel Valley. That radius keeps travel, scheduling, and project logistics realistic.

Concrete Driveways

Concrete driveway installation, replacement, and widening serve Monterey homes from compact city lots to wider suburban properties. The work applies to single-car, double-car, and turn-around configurations.

Installation starts with a compacted subgrade and aggregate base, set forms, reinforcement such as rebar or welded wire where project-appropriate, and ready-mix concrete placed and finished with control joints and a broom finish for traction.

The finished driveway is a stable, usable surface sized to the property, with appropriate drainage and a clean, skid-resistant finish that holds up to Monterey coastal conditions.

Concrete Patios

Concrete patios extend outdoor living space for Monterey homes, covering backyard entertainment areas, dining pads, and garden patios. The work suits properties from compact coastal cottages to larger hillside lots.

Patio construction is built on proper grading and forms, with a drainage slope away from the home, reinforcement, control joints, and either a broom or trowel finish depending on the desired surface texture and use.

The result is a clean, level outdoor living surface with appropriate drainage that keeps water moving away from the foundation and landscaping.

Stamped & Decorative Concrete

Stamped and decorative concrete adds pattern and color to patios, walkways, and other exterior surfaces on Monterey properties. It suits homeowners who want a finished look beyond a plain broom surface.

The process uses stamp mats pressed into integrally colored or color-hardened concrete, a release agent to keep mats from sticking, and a concrete sealer that protects the pattern and deepens the color.

The finished surface carries the look of stone, brick, or tile with the durability of a concrete slab, sealed against weather and wear.

Concrete Walkways & Sidewalks

Concrete walkways and sidewalks connect entrances, side yards, and frontage for Monterey homes and small commercial properties. The work covers private walkways and public-frontage pedestrian flatwork where applicable.

Walkway installation uses set grades, forms, reinforcement, and pedestrian-appropriate broom finishes, with control joints and clean transitions at curbs, steps, and driveway edges.

The result is a safe, even pedestrian path with good traction and clean joint lines that fit the landscape and entry layout.

Concrete Repair & Resurfacing

Concrete repair and resurfacing address cracks, spalls, and surface wear on existing Monterey driveways, patios, and slabs. The work applies where the underlying slab is sound and the damage is cosmetic or localized.

Repair uses surface preparation, repair mortar, and bonding systems for patching, or concrete overlays and resurfacing systems to restore a consistent surface without removing the full slab.

The finished repair restores use and appearance to the affected area, and a resurfacing overlay can give an older slab a renewed, finished look.

Concrete Steps & Stoops

Concrete steps and stoops serve entrances and grade changes at Monterey homes, connecting walkways to porches, doors, and landing areas. The work applies where a durable, formed transition is needed between elevations.

Construction uses formwork for risers and treads, reinforcement, and landings sized to the entry, with concrete placed and finished for a clean, even stepping surface.

The finished steps provide a stable, slip-resistant entrance transition that matches the walkway and porch layout.

Concrete Foundations

Concrete foundations support new construction and additions on Monterey properties, spanning residential and light commercial scopes. The work applies wherever a new structure or addition requires a poured concrete base.

Foundation construction uses footing and stem-wall forms, reinforcement, and anchor bolts set to the structural plans, with ready-mix concrete placed and finished to the required dimensions. Where engineering is required, it is supplied by the project's design professional.

The finished foundation provides a stable, level base for framing, sized and reinforced to match the approved structural design.

Concrete Slabs

Concrete slabs cover project pads, equipment pads, shed bases, and similar flatwork on Monterey residential and commercial properties. The work applies where a poured, reinforced slab on grade is needed.

Slab installation starts with a compacted subgrade and aggregate base, forms, reinforcement, and control joints or sawcut joints placed to manage shrinkage cracking for the slab size.

The finished slab is a stable, level surface sized to the intended use, with joints that keep cracking controlled and the surface usable.

Concrete Retaining Walls

Concrete retaining walls hold back grade on Monterey hillside and sloped properties, creating level areas for landscaping, patios, and driveways. The work applies where a formed, reinforced concrete wall is the right solution for the grade change.

Retaining-wall construction uses a footing, reinforcement, and a formed wall with drainage provisions behind the wall. Where structural design is required for height or load, it is supplied by the project's design professional.

The finished wall provides a stable, durable grade change with drainage accounted for, holding back soil without the movement that can damage flatwork and landscaping above.

Commercial Concrete

Commercial concrete flatwork serves Monterey businesses needing sidewalks, slabs, curbs, and accessibility transitions on their properties. The work applies to commercial property scopes where durable, code-conscious flatwork is required.

Commercial scopes use heavier-duty flatwork, slabs, sidewalks, curbs, and accessibility transitions sized to the property's traffic and use, with reinforcement and joint layouts matched to the commercial application.

The finished commercial flatwork is a durable, even surface that handles customer, delivery, and accessibility traffic cleanly.

Concrete Cutting, Sawing & Core Drilling

Concrete cutting, sawing, and core drilling serve Monterey properties that need controlled openings in existing slabs or walls. The work applies where plumbing, electrical, or trench modifications require a clean, controlled cut.

The work uses diamond slab saws, wall saws, and core drills for controlled cuts and openings, with water or dust suppression as appropriate to the tool and site.

The result is a clean, controlled opening without the uncontrolled breakage that can damage surrounding concrete or utilities.

Concrete Demolition & Removal

Concrete demolition and removal clear old slabs, driveways, and flatwork on Monterey properties preparing for replacement or new construction. The work applies where existing concrete must be removed before new work can proceed.

Demolition uses sawcut boundaries for clean edges, a breaker for removal, equipment access sized to the site, and concrete debris haul-off to keep the area clean for the next phase.

The finished removal leaves a clean, accessible area ready for new concrete or site work, with debris hauled off rather than left on site.

Step 1: Site Evaluation and Project Scope

Each concrete project begins with a site evaluation that looks at the existing surface, grades, drainage, access, and the scope the property owner wants completed. That evaluation informs the estimate and the approach for preparation, placement, and finishing specific to the Monterey property.

Step 2: Estimate and Project Planning

Based on the evaluation, a project estimate is prepared covering demolition, base preparation, reinforcement, finish, and cleanup. Planning also accounts for access, haul-off, and any permit or right-of-way considerations tied to the specific address and scope.

Step 3: Site Preparation and Formwork

Preparation includes demolition of existing material where needed, compaction of the subgrade, placement of aggregate base, and setting forms to the layout and grades. Reinforcement such as rebar or welded wire is installed where the project requires it, ahead of the concrete pour.

Step 4: Concrete Placement and Finishing

Ready-mix concrete is placed, screeded to grade, and finished with the selected finish — broom, trowel, or stamped — using hand tools and floats. The surface is worked to an even, consistent texture with edges and details tooled for a clean, finished appearance.

Step 5: Jointing, Detail Work, and Cleanup

Control joints, sawcut joints, or isolation joints are placed to manage shrinkage cracking, and detail work is completed at edges, transitions, and fixtures. The site is cleaned of form material, slurry, and debris so the finished work is presented cleanly.

Step 6: Final Project Walkthrough

A final walkthrough confirms the finished surface, drainage, joints, and cleanup against the agreed scope. Any remaining detail items are noted and addressed so the project is delivered in a finished, usable condition for the Monterey property owner.

Broom-Finished Concrete

Broom-finished concrete is the standard, slip-resistant surface for Monterey driveways, walkways, and exterior flatwork. It suits properties that want a clean, practical, low-maintenance finish rather than a decorative surface.

The finish is produced by drawing a concrete broom across the freshly troweled surface, creating a consistent texture that improves traction when wet — important in Monterey's coastal moisture and marine-layer conditions.

The finished surface is a durable, skid-resistant flatwork finish that holds up well to foot and vehicle traffic with minimal maintenance.

Smooth and Troweled Concrete

Smooth, troweled concrete produces a refined surface suited to patios, landings, and interior-style flatwork where a cleaner look is wanted. It fits Monterey properties looking for a finished appearance without a decorative stamp pattern.

The finish uses hand trowels and floats to produce a tight, even surface, with edges tooled cleanly. Outdoors, it is typically paired with a sealer and careful drainage planning since a smooth surface can be more slick when wet.

The result is a clean, refined surface that presents well for outdoor living areas while remaining durable and easy to clean.

Stamped Concrete

Stamped concrete carries the look of stone, brick, slate, or tile into patios, walkways, and entries on Monterey properties. It suits homeowners who want a decorative finish with the durability of a concrete slab.

The process uses stamp mats pressed into colored concrete with a release agent, then sealing to protect the pattern and deepen the color. Pattern and color are selected to fit the home and landscape.

The finished surface delivers a decorative, sealed finish that looks intentional with the home while remaining a single, durable concrete slab.

Colored and Decorative Concrete

Colored and decorative concrete adds integral color or a color-hardened surface to patios, walkways, and flatwork on Monterey properties. It suits projects that want more than plain gray without committing to a full stamp pattern.

Color is introduced either integrally into the ready-mix or as a color hardener worked into the surface, then sealed for protection. The approach can be paired with a broom or light texture for a finished but understated look.

The result is a warm, finished surface that complements the home and landscape while keeping the durability of a conventional concrete slab.

Installation & Flatwork

Concrete driveway: $8–$20 per sq. ft.

Notes: standard and broom work trends lower; demolition, difficult access, reinforcement, and decorative finishes can move cost higher.

Driveway replacement: $10–$26 per sq. ft.

Notes: includes typical allowance for removal and preparation; disposal volume and access affect final price.

Concrete patio: $8–$18 per sq. ft.

Notes: grading, drainage, finish, and site access drive the range.

Stamped/decorative concrete: $9–$22 per sq. ft.

Notes: pattern complexity, coloring systems, and sealing affect price.

Walkways/sidewalks: $8–$16 per sq. ft.

Notes: public-right-of-way work can add City permit or inspection requirements.

Concrete slabs: $8–$16 per sq. ft.

Notes: slab use, thickness and design requirements, reinforcement, access, and base preparation drive price.

Concrete foundations: $8–$18+ per sq. ft. (planning range)

Notes: engineered design, excavation, reinforcing, access, and site conditions can materially change cost.

Concrete retaining walls: $30–$60 per sq. ft. of wall face

Notes: height, excavation, drainage, reinforcement, and engineering requirements are major cost drivers.

Repair & Specialty

Concrete repair: $3–$25 per sq. ft.

Notes: localized patching differs substantially from structural or full-depth repair.

Concrete resurfacing: $3–$9 per sq. ft. for straightforward resurfacing

Notes: decorative overlay systems can run approximately $7–$20 per sq. ft.

Foundation repair: $2,500–$10,000 typical planning range

Notes: significant settlement or engineered remediation can exceed $20,000.

Concrete steps/stoops: $1,800–$6,000 for many poured projects

Notes: width, number of steps, landing configuration, demolition, and reinforcement affect price.

Concrete demolition/removal: $2–$6 per sq. ft.

Notes: slab thickness, reinforcement, access, and disposal affect cost.

Concrete cutting/sawing: approximately $8–$14 per linear ft. for common slab-sawing scopes

Notes: depth, reinforcement, access, and specialty cutting change pricing.

Driveway approach/apron: approximately $3,000–$7,500+ planning range

Notes: public-right-of-way, curb, gutter, sidewalk, and permit scope can materially affect total.

Define the Full Scope Before Comparing Estimates

Before comparing estimates, define the full scope: size, demolition, access, finish, drainage, reinforcement, and any permit or right-of-way considerations. Estimates that cover different scopes are not directly comparable, and a lower number can reflect less preparation rather than better value.

Compare Preparation and Finish, Not Just Square-Foot Price

Square-foot price only means something next to what is included — subgrade compaction, aggregate base, forms, reinforcement, control joints, and the finish type all affect performance. A slab placed on poorly prepared base with no reinforcement will cost less and perform worse than the same size done properly.

Ask How Demolition and Disposal Are Handled

Ask how existing concrete demolition, sawcut boundaries, and debris haul-off are handled. Removal and disposal are real cost drivers, and a clean removal with haul-off keeps the site ready for the next phase rather than leaving concrete piled on site.

Account for Drainage and Existing Grades

Drainage and existing grades shape every concrete project. A slab or flatwork that traps water against the home or directs runoff poorly will cause problems, so grades and drainage slope are planned before the pour rather than worked out afterward.

Clarify Permit or Right-of-Way Requirements

In Monterey, work that enters the public right-of-way — including driveway approaches, sidewalks, and ADA ramp, curb, and gutter work — can fall under City encroachment review. Confirm current permit requirements for the specific address and scope before work begins.

Make Sure Structural Work Matches the Approved Design

For foundations, retaining walls, and structural concrete, the installed work should match the approved structural plans — footing dimensions, reinforcement, and anchor bolts as specified. Monterey Concrete Contractor does not provide engineering services; where engineering is required, it is supplied by the project's design professional.

How much does concrete work cost in Monterey, CA?

Concrete work in Monterey, CA costs within the researched 2026 planning ranges shown above, with total price driven by project size, demolition, access, base preparation, reinforcement, finish, drainage, and any permit or structural scope. Installation and flatwork typically land lower in the range, while replacement, decorative finishes, foundations, retaining walls, and repair or demolition add cost based on site conditions. Final pricing always depends on the actual conditions at your specific address.

How much does a concrete driveway cost in Monterey?

A concrete driveway in Monterey typically costs about $8 to $20 per square foot for new installation, with driveway replacement often running $10 to $26 per square foot. Demolition and removal of existing material, difficult access, reinforcement, decorative finishes, and widening or extension work can move the total higher. The final price depends on the size, shape, and site conditions of the specific driveway.

How much does a concrete patio cost in Monterey?

A concrete patio in Monterey typically costs about $8 to $18 per square foot, with the total driven by grading, drainage slope, finish selection, and site access. Stamped or decorative finishes and complex shapes tend toward the higher end of the range, while a straightforward broom-finished patio trends lower. Final pricing depends on the actual layout and conditions at your property.

How much does stamped concrete cost in Monterey?

Stamped concrete in Monterey typically costs about $9 to $22 per square foot, depending on pattern complexity, the coloring system used, and sealing requirements. Integral color, color hardener, release agents, and more intricate stamp mats all add to the installed price. Final cost depends on the size, pattern, and finish selected for the specific surface.

Can cracked concrete be repaired instead of replaced?

Yes, cracked concrete can often be repaired rather than replaced when the damage is localized and the underlying slab is stable. Surface cracks, small spalls, and isolated settlement can be addressed with repair mortar, bonding systems, or concrete overlays that restore appearance and use. Widespread cracking, structural movement, or drainage-related failure may point toward replacement, and a site evaluation helps determine which approach fits.

What concrete services do you provide in Monterey?

Monterey Concrete Contractor provides residential and commercial concrete services across Monterey and a 25-mile service radius, including driveways, patios, walkways and sidewalks, stamped and decorative concrete, repair, resurfacing, slabs, steps and stoops, foundations, foundation repair, footings and stem walls, retaining walls, commercial concrete, ADA ramps, curbs, gutters and driveway approaches, concrete cutting, sawing and core drilling, and demolition and removal. Service pages linked throughout the site detail each scope.

Do you handle residential and commercial concrete projects?

Yes, both residential and commercial concrete projects are handled throughout the Monterey service area. Residential work includes driveways, patios, walkways, decorative concrete, slabs, foundations, and repair, while commercial scopes include flatwork, sidewalks, curbs, accessibility transitions, and specialty concrete. Project scope and access are evaluated for each property type.

How far from Monterey do you provide concrete service?

Monterey Concrete Contractor provides concrete service within an honest 25-mile radius of Monterey, covering Monterey Peninsula communities such as Pacific Grove, Seaside, Marina, Carmel-by-the-Sea, Pebble Beach, and Carmel Valley. Properties outside that radius can be discussed on a case-by-case basis, but the standard service area keeps travel and response realistic.

Are you insured?

Yes, Monterey Concrete Contractor is insured. Insurance is part of operating a responsible concrete service business, and the insured status applies across the residential and commercial concrete work offered within the 25-mile service area. Specific coverage details can be discussed during the estimate conversation.

How much experience do you have with concrete work?

Monterey Concrete Contractor has 10+ years of concrete experience, spanning residential and commercial installation, repair, decorative concrete, foundations, and specialty scopes. That experience covers the full range of preparation, placement, finishing, and cleanup steps that keep a concrete project on track in Monterey Peninsula conditions.

Does concrete work in Monterey require a permit?

Concrete work in Monterey may require a permit, depending on the project scope and whether the work enters or affects the public right-of-way. The City of Monterey reviews encroachment categories that include driveway approaches, sidewalks, and ADA ramp, curb, and gutter work, and building or structural permit review applies based on the scope of the project. Property owners should confirm current requirements for the specific address and scope before work begins.

Do driveway approaches and sidewalk projects require City review?

Yes, driveway approaches, sidewalks, and ADA ramp, curb, and gutter projects in Monterey are identified by the City as encroachment categories that can fall under City review or permit requirements when the work enters the public right-of-way. Monterey has also adopted the 2025 California Building Standards Code with local amendments. The exact requirements depend on the specific address and scope.

What affects the cost of concrete demolition?

Concrete demolition cost is driven mainly by slab thickness, reinforcement, site access, and disposal volume, with researched 2026 planning ranges around $2 to $6 per square foot. Reinforced slabs, tight access, and large haul-off volumes add to the total, while a small, unreinforced slab in an open area trends lower. The final price depends on the actual conditions at the site.

What affects the cost of a concrete foundation?

A concrete foundation in Monterey typically costs in a planning range starting around $8 to $18 or more per square foot, with the total driven by engineered design, excavation depth, reinforcing, site conditions, access, and any engineering or permit requirements. Foundation repair and foundation remediation can run significantly higher depending on the extent of settlement or the need for engineered solutions. Final pricing depends on the actual site and structural scope.

How do I request a concrete estimate?

To request a concrete estimate, call Monterey Concrete Contractor at 831-603-3370 or submit the five-field estimate form on this page, providing your full name, phone number, email, the property address where work is needed, and the concrete service you are requesting. The information goes straight into the estimate process so the project can be discussed and scheduled. There is no obligation tied to submitting the form.

Start Your Monterey Concrete Project

Whether you need a new driveway, a patio, stamped concrete, a repair, or a foundation scope, call 831-603-3370 or submit the estimate form. We will discuss the scope, the site, and the finish that fits your Monterey property.