Concrete Cutting, Sawing & Core Drilling in Monterey, CA
Concrete cutting, sawing, and core drilling projects in Monterey cover flat and slab sawing, wall sawing, core drilling, and controlled cuts for removal, with researched 2026 planning pricing commonly ranging from $8 to $14 per linear foot for standard slab-sawing scopes, while depth, reinforcement, access, and specialty cutting change pricing.
Monterey Concrete Contractor is an insured, service-area concrete contractor with 10+ years of concrete experience handling concrete cutting across Monterey and a 25-mile service radius. Cutting is a professional specialty service — no operating instructions are provided, and structural cuts may require approved plans or evaluation by a design professional.
Concrete cutting scope depends on the concrete thickness, reinforcement, cut depth, access, and whether the cut is structural. Each project is planned around the cut and any structural or utility considerations. Cost ranges are listed below. Call 831-603-3370 or request a cutting estimate.
Professional Concrete Cutting Services in Monterey
Concrete cutting is a professional specialty service that requires the right equipment and safety planning. Monterey Concrete Contractor brings verified experience and insured service, with no DIY instructions.
- 10+ Years of Concrete Experience. More than a decade of hands-on concrete work informs how each cut is planned and executed — without inventing a business founding date or job count.
- Insured Concrete Service. Monterey Concrete Contractor is insured, and that insured status applies across the concrete cutting work offered within the service area.
- Professional Specialty Equipment. Cutting uses diamond blades, slab saws, wall saws, and core drills — no operating instructions or DIY directions are provided.
- Controlled Cuts. Cuts are planned and controlled, with sawcut boundaries that define the cut area and protect surrounding concrete and structure.
- Structural and Utility Awareness. Structural cuts may require approved plans or evaluation by a design professional, and utility considerations are part of the planning before any cut is made.
- Transparent Planning Prices. Researched 2026 cost ranges appear directly on this page so you can compare cutting scopes before reaching out.
- 25-Mile Monterey Service Area. Concrete cutting projects are served within an honest 25-mile radius of Monterey, keeping travel and scheduling realistic.
Our Concrete Cutting and Drilling Services
Each cutting scope below is planned around the concrete thickness, reinforcement, cut depth, access, and any structural or utility considerations.
Flat and Slab Sawing
Flat and slab sawing for controlled cuts in horizontal concrete surfaces across Monterey properties.
Slab sawing uses diamond blades, slab saw, cut depth control, slurry control, and dust control for clean controlled cuts.
The outcome is a clean, controlled cut in the slab for openings, removal boundaries, or control joints.
Wall Sawing
Wall sawing for controlled cuts in vertical concrete walls for openings and alterations.
Wall sawing uses diamond wall saw, track-mounted saw, cut depth control, and slurry control for clean vertical cuts.
The outcome is a clean, controlled vertical cut for wall openings or alterations from approved scope.
Core Drilling
Core drilling for precise holes through concrete slabs and walls for utility and conduit passages.
Core drilling uses a core drill, diamond bit, cut depth and diameter control, and slurry control for clean precise holes.
The outcome is a clean, precise hole through the concrete for utility, conduit, or sampling passages.
Controlled Cuts for Concrete Removal
Controlled sawcut boundaries for concrete removal to define the demolition area and protect surrounding concrete.
Removal cuts use diamond saws, sawcut boundaries, cut depth control, and coordination with demolition equipment.
The outcome is a defined removal boundary that limits uncontrolled breaking and protects adjacent surfaces. See concrete demolition.
Openings and Alteration Cuts From Approved Scope
Openings and alteration cuts for doors, windows, vents, and utility passages from approved scope.
Opening cuts use slab or wall sawing, core drilling, cut depth control, and coordination with any structural or utility considerations.
The outcome is a clean opening cut from the approved scope, with structural review confirmed where applicable.
What Affects a Concrete Cutting Project?
Several factors affect a concrete cutting project. Each is evaluated before the cutting method and equipment are chosen.
Concrete Thickness and Reinforcement
Thicker concrete and reinforced concrete with rebar require deeper cuts and more powerful equipment. Reinforcement affects blade selection, cut time, and cost.
Cut Depth and Access
Cut depth and access to the surface affect the equipment that can be used. Deep cuts and tight access require specialized equipment and increase cost.
Structural and Utility Considerations
Structural cuts may require approved plans or evaluation by a design professional, and utility locations must be confirmed before cutting. These considerations are part of the planning before any cut is made.
When Professional Concrete Cutting Is Needed
An Opening Is Needed
When an opening is needed for a door, window, vent, or utility passage, professional cutting creates a clean, controlled opening rather than uncontrolled breaking.
A Removal Boundary Is Needed
When a concrete removal is planned, controlled sawcut boundaries define the removal area and protect surrounding concrete from uncontrolled breaking.
A Utility Hole Is Needed
When a precise hole is needed for a utility, conduit, or sampling passage, core drilling creates a clean, precise hole through the concrete.
A Structural Alteration Is Planned
When a structural alteration is planned, professional cutting from approved scope creates controlled cuts, with structural review confirmed where applicable.
Our Concrete Cutting Process
Site Evaluation and Scope
The project starts with evaluating the concrete thickness, reinforcement, cut depth, access, and any structural or utility considerations. The cutting scope is confirmed against the approved scope before any cut is made.
Equipment Selection
The appropriate equipment is selected based on the cut type, depth, and access — slab saw, wall saw, or core drill with diamond blades or bits. No equipment operating instructions are provided.
Cutting Execution
Cuts are executed with controlled depth and alignment, using slurry control and dust control where appropriate. Sawcut boundaries and openings are placed per the approved scope.
Cleanup and Final Review
Slurry and debris are cleaned up, the cut area is reviewed against the approved scope, and the finished cuts are confirmed with the property owner.
How Much Does Concrete Cutting Cost in Monterey?
Concrete cutting in Monterey commonly falls within a researched 2026 planning range of about $8–$14 per linear foot for many standard slab-sawing scopes, with wall sawing at approximately $8–$25 or more per linear foot and core drilling at approximately $50–$600 or more per hole depending on diameter, depth, reinforcement, and access.
2026 researched planning ranges — final project pricing depends on actual cut scope and site conditions.
Flat / Slab Sawing
- Flat/slab sawing: $4–$15 per linear ft benchmark; ~$8–$14 for many standard scopes
- Notes: Deeper or reinforced cuts can exceed this range.
Wall Sawing / Core Drilling
- Wall sawing: approximately $8–$25+ per linear ft
- Notes: Depth, reinforcement, access, and specialty cutting change pricing.
- Core drilling: approximately $50–$600+ per hole
- Notes: Depending on diameter, depth, reinforcement, and access; small holes may fall toward the low end.
Minimums
- Small jobs may carry $150–$400 mobilization/minimum benchmark
- Notes: Never guarantee price by linear foot without depth and scope. These are researched planning ranges, not this company's historical invoices.
Cost drivers include cut type, depth, reinforcement, access, specialty cutting, slurry and dust control, and mobilization. These are researched planning ranges, not this company's historical invoices.
Last Updated: September 7, 2026
Structural and Safety Considerations for Concrete Cutting
Concrete cutting has structural and safety considerations. Load-bearing or structural cutting may require approved plans or evaluation by a design professional, and utility locations must be confirmed before cutting. No blade selection, saw setup, electrical or wet-cut procedures, cutting sequence, structural modification instructions, or DIY drilling directions are published.
Concrete cutting may require permit review depending on the scope and whether the work is part of a larger project. Monterey has adopted the 2025 California Building Standards Code with local amendments. Property-specific requirements should be confirmed for the exact address and scope before work begins.
Concrete Cutting Across Monterey
Concrete cutting scope can differ across Monterey properties, from residential slab openings to commercial wall and core drilling scopes. Each cutting project is planned around the concrete thickness, reinforcement, cut depth, access, and structural or utility considerations.
Cut type, depth, reinforcement, access, specialty cutting, and whether the cut is structural all shape the scope. No two properties have identical conditions, so each cutting project is evaluated on its own site.
Monterey Concrete Contractor serves concrete cutting projects within approximately 25 miles of Monterey. View our service areas to see the communities covered.
Frequently Asked Questions About Concrete Cutting
How much does concrete cutting cost in Monterey?
Concrete cutting in Monterey commonly plans around $8–$14 per linear foot for standard slab sawing, with wall sawing at $8–$25 or more per linear foot and core drilling at $50–$600 or more per hole. The total moves with cut type, depth, reinforcement, access, and specialty cutting.
What is slab sawing?
Slab sawing, also called flat sawing, is the cutting of horizontal concrete surfaces with a diamond blade and slab saw to create controlled cuts for openings, removal boundaries, or control joints. It uses cut depth control, slurry control, and dust control for clean cuts.
What is wall sawing?
Wall sawing is the cutting of vertical concrete walls with a track-mounted diamond wall saw to create controlled vertical cuts for wall openings or alterations. It is used for doors, windows, vents, and alteration cuts from approved scope.
What is core drilling?
Core drilling is the drilling of precise holes through concrete slabs and walls with a core drill and diamond bit, for utility, conduit, or sampling passages. Hole diameter, depth, reinforcement, and access affect the cost per hole.
Can you cut reinforced concrete?
Yes, reinforced concrete can be cut, but rebar and reinforcement require deeper cuts, more powerful equipment, and diamond blades or bits designed for reinforcement. Reinforcement affects blade selection, cut time, and cost.
Can you make structural cuts?
Structural cuts may be made from approved scope, but load-bearing or structural cutting may require approved plans or evaluation by a design professional. Structural cuts are not made without confirming the approved scope and any structural review.
How do I request a concrete cutting estimate?
You can request a concrete cutting estimate by calling 831-603-3370 or submitting the form on this page, providing your full name, phone number, email, the property address, and the concrete service requested. There is no obligation tied to submitting the form.
Request a Concrete Cutting Estimate
Whether you need flat or slab sawing, wall sawing, core drilling, controlled cuts for removal, or openings and alteration cuts from approved scope, the first step is a project conversation. Call 831-603-3370 or submit the estimate form below. You can also learn more about Monterey Concrete Contractor or explore related work like concrete demolition and removal, commercial concrete, and concrete foundations.